Dynamometer, High Precision Digital DS2-500N 1000N Push Force Gauge Push 20N 2KGS Pull Strength Tester Small Sensor Dynamometer(DS2-100N)

Product parameter:Maximum load value: 2N (200gf) to 1000N (100kgf)Display: 4 bit LCD displaySafety overload: 150% rated (100% flashing warning)Power supply: built in safety, durable, high-capacity lithium battery, external AC adapterWeight: approximately 520g, depending on maximum load value.Output function: USB connect computer, digital display tension and pressureStandard accessories: 6 accessories, AC adapter, portable caseAccuracy: + 0.1%F.SSampling rate: 1000 times per secondThe screen flash indicates overload; the low battery symbol blinksFour bit LCD, display data can be positive and negative display

• 1. high precision and high resolution:Accuracy is better than level 0.2 (that is, 0.2%F.S plus or minus 1digit); minimum readings are 0.001N.
• 2. peak hold function:You can grab the peak value (maximum) in the test process
• 3. comparison function:The upper and lower limit deviation is set freely, and the screen flash hint. The result can be seen intuitively by the eyes. The result of misjudgment will not be produced
• 4. simple conversion between three commonly used mechanical units in the world.It can be converted quickly in three units of measurement, N, KGF and lbf.
• 5. sampling speed optional:The instrument can select the appropriate sampling rate according to the actual situation of the test, when the need to enter sensitive reaction (such as tensile test materials when needed) high sampling speed, the highest sampling rate can reach 1000 times per second. When low sampling rates are required, low sampling rates can be used to test them.